Name: Fuel Pump With Filter
OEM Number: 808505T01; 809088T; 827682T
Brand: Oversee Marine
Condition: Brand New Aftermarket Parts
Made In: China
New fuel pump for Mercury, For Mariner , FOr Yamaha and Mercruiser
Replaces For Mercury part numbers 809088T-1, 808505T, 827682T
Replaces For Yamaha part number 65L-13907-00-00
Fits:
Mariner225 & 250 3.0L EFIMercury225, 250, 250XB 3.0L EFI300 3.0L EFI ProMax300 3.0L EFI SuperMagnumSportJet 240 EFI
Also used on Mercuiser 4.3L, 5.7L, 7.4L, 8.2L TBI and MPI engines built between 1995-97 that used high pressure Pump inside the VST Tank. This is not the pump mounted in the plastic box on the side of the engine.
Also fits YamahaL225 (1997-1999)L250 (1997-1999)S225 (1997-1999)S250 (1997-1999)V200 (1998)V225 (1998).
Note in 1999 For Yamaha also used a shorter yellow fuel filter used on many 150-250hp engines.
The fuel pumps are the same only the filter is different.
Brand New Propeller Prop Shaft Housing,Cap Casing For Tohatsu Outboard Motor M25H;M30H;MX25H;MX30HThe cap housing only code ref.: 346S60101-5, 346N60101-5, 346Q-60101-8The propeller housing assy ref.: 349Q60100-7If you choose the propeller housing assy,it will included the following items:346Q60101-8 Propeller Housing X1
346-60102-0 Propeller Roller Bearing x19601-0-6205 Ball Bearing x1332-60103-0 Oil Ring X13AC-60111-0 Oil seal x2
Engine gasket kit Tohatsu M 9.9 C + D and M 15 C + D , two-stroke 247 ccContains species:351-01005-1 , Cylinder head gasket346-01032-0 , Thermostat gasket350-02305-2 , Exhaust gas cooling gasket, outer350-02306-2 , Exhaust gas cooling gasket, inner350-00121-0 , Crankshaft gasket, upper3M2-00122-0 , Crankshaft packing box, lower (replacement item 350-01215-0)338-01403-0 , O-ring crankshaft350-02104-2 , Intake gasket, outer350-02105-3 , Intake gasket, inner3C8-03121-0 , O-ring/gasket carburetor halves3C8-02011-0 , O-ring/gasket carburetor neck to intake3C8-03193-0 , Gasket drain screw carburetor350-61012-2 , Rig gasket rig3M2-00122-0 , Packing box, lower to rig (ers . art 350-01215-0)3M3-01303-0 , Engine block gasket3G2-02414-1 , Carburetor neck gasket for air canTohatsu M 18 D + E has the same kit, except cylinder head gasket art 3M4-01005-0 (replaces art 350- 01005-0)Same as Mercury art 8M0065497
Relief Valve for Mercury Marine Outboard Trim Tilt AssyRef.Part number: 893929A01Specification:Product Name: Relief ValveColor: WhiteSize: About 58.5mmApplication:for Mercury 30 to 150-175-200-225-250-300HP Force 40 to 120HP Att.: We saw some online sellers is selling this product to be stainless steel, looks stronger which is very dangerous!This is the pressure relief valve of the entire cylinder because the pressure relief valve of the Mercury series is not designed with the spring steel ball and is not adjustable. If the pressure is too high during the lifting of your boat, this part will be ejected or broken, and the excessive pressure inside the cylinder will be discharged. If this thing becomes a product that will not break, it will block the pressure relief channel of the cylinder, causing the entire cylinder to easily crack.I really don't understand whether this seemingly balanced design is going to cause greater losses to customers.We respect the choice of our customers, but I think we still have to tell the users of the potential risks, which is responsible for them.
Main features:
The steering pump is with compact inner structure and the fashionable and beautiful appearance.Two-way Built- in locking valve eliminatesthe rebound torque.
Easy to replace the shaft seal,user-friendly design;
Steering shaft with special surface treatment not only has strength and reliability,but also has the characteristics of wear resistance, corrosion resistance.
High-strength aluminum alloy shell and surface treatment process can ensure its wear and corrosion resistance and prevent water erosion effectively.
Piping: High-strength nylon quick-fitting 1/4-pipe fittings makes the installation compact and it is reusable.
The use of custom high-standard hydraulic oil can improve the lubrication of parts and seal protection.
Anti-aging, corrosion-resistant.Anti-slip wave design delivers operationmore comfortable operation.
With a shaft seal that you can easilyreplace, and the helm pump is a userfriendly design.
High-strength nylon hose with quick-fitpipe can fit for easy installation andmultiplere-uses.
The state of the sealing system offerssuperior resistance to repeatedcompression sets
The hydraulic pump has a compactinternal structure and a stylish exterior.Fits forboatsrated to amaximum of 150HP.
TPR1509 , Volume100cc,Output force 360KG,
Shaft diameter 16mm, ,Bore diameter30mm
Stroke 198mm
100-150HP Boat HydraulicSteering Cylinder
The steering kit, including a cable, a pump,a cylinder, and a steering wheel, isideal for skiffs, center consoles, bass boats,and runabouts. The balanced, compactsteering cylinder was developed tofit these smaller splash wells.This affordable system comeswith everything needed for easy installation.
Steering Wheel
Replaceable Shaft Seal
Compact & Neat
Package Content
1 xHydraulic Pump
2 xQuality Nylon Hose
1 x Cylinder
1 x Steering Wheel
1 x Accessory Kit
100% Brand New and High Quality
Trim Tilt Switch for Mercury MotorsBrand new, Cowl mounted rocker switch style with bullet connectors. This switch connects directly to the engine harness.Replaces part # 87-856990, 896620, 87-8M0042301, 18286A13, 18286A25, 18286A27, 18286A4, 18286A40, 850691
Package:
1 x Trim Tilt Switch
Feature:
*OEM specifications, perfect replacement.*Bullet connectors, plug and play.*Rocker switch style with durable spring.*Reliable AWG 20 standard harness wire.*Fits Mercury Mariner Tracker 30-300 HP , Mercury Force 40-120 HP
Fit For the Following Models
Fit for Mercury Outboards: 150CXL SeaPro, 150L, 150L Pro XS, 150L SeaPro, 150XL, 150XL Pro XS, 150XL SeaPro
Fit for Mercury Marine Engine: 135.0HP, 150.0HP, 150.0HP ProXS, 150.0HP SeaPro
For Mercury Marine 150HP Outboard 2012-ON 4-Groove Pulley 64mm OD
Engine disposition: Outboard Starter Motor Solenoid MADE IN TAIWANCompatible Brand: Fits Mercury, Fits OMC, Fits VolvoNumber: 809463A1, 809463A1And ref. fits for the following items:Arco SW463 MerCruiser Volvo Delco Starter Solenoid 809463A1 8094631 809462 8094621 809463 3859054 3850216Replacement starter solenoidFits OE Delco PG 260This solenoid will not fit Arco 30460 or 30470Replaces OMC 3850216Replaces Mercury 809463A1, 8094631, 809462, 8094621 and 809463Replaces Volvo Penta 3859054 & 3850216Connection Method-----Please check it before you install the solenoid.
Main features: The steering pump is with compact inner structure and the fashionable and beautiful appearance.Two-way Built- in locking valve eliminatesthe rebound torque.
Easy to replace the shaft seal,user-friendly design;
Steering shaft with special surface treatment not only has strength and reliability,but also has the characteristics of wear resistance, corrosion resistance.
High-strength aluminum alloy shell and surface treatment process can ensure its wear and corrosion resistance and prevent water erosion effectively.
Piping: High-strength nylon quick-fitting 1/4-pipe fittings makes the installation compact and it is reusable.
The use of custom high-standard hydraulic oil can improve the lubrication of parts and seal protection.
Made of aluminum alloy and high-qualityplastic. Anti-aging, corrosion-resistant. Anti-slip wave design delivers operationmore comfortable operation.
High-strength nylon hose with quick-fit1/4pipe can fit for easy installation andmultiplere-uses.
The cylinder is equipped with a built-in two-way locking valve which eliminatesrebound torque during torsion.
The state of the sealing system offerssuperior resistance to repeatedcompression sets and is designed tobetter withstand the harsh environment.
With a shaft seal that you can easilyreplace, and the helm pump is a userfriendly design.
The hydraulic pump has a compactinternal structure and a stylish exterior. Fits for boats rated to a maximum of 350 HP.
700HP Boat HydraulicSteering Cylinder
The steering kit, including a cable, a pump,a cylinder, and a steering wheel, isideal for skiffs, center consoles, bass boats,and runabouts. The balanced, compactsteering cylinder was developed to fit these smaller splash wells. This affordable system comeswith everything needed for easy installation.
Steering Wheel
Replaceable Shaft Seal
Compact & Neat
Package Content
1 x Hydraulic Pump
1 x Quality Nylon Hose(6M)
1 x Cylinder
1 x Steering Wheel
1 x Accessory Kit
Main features: The steering pump is with compact inner structure and the fashionable and beautiful appearance.Two-way Built- in locking valve eliminatesthe rebound torque.
Easy to replace the shaft seal,user-friendly design;
Steering shaft with special surface treatment not only has strength and reliability,but also has the characteristics of wear resistance, corrosion resistance.
High-strength aluminum alloy shell and surface treatment process can ensure its wear and corrosion resistance and prevent water erosion effectively.
Piping: High-strength nylon quick-fitting 1/4-pipe fittings makes the installation compact and it is reusable.
The use of custom high-standard hydraulic oil can improve the lubrication of parts and seal protection.
Made of aluminum alloy and high-qualityplastic. Anti-aging, corrosion-resistant. Anti-slip wave design delivers operationmore comfortable operation.
High-strength nylon hose with quick-fit1/4pipe can fit for easy installation andmultiplere-uses.
The cylinder is equipped with a built-in two-way locking valve which eliminatesrebound torque during torsion.
The state of the sealing system offerssuperior resistance to repeatedcompression sets and is designed tobetter withstand the harsh environment.
With a shaft seal that you can easilyreplace, and the helm pump is a userfriendly design.
The hydraulic pump has a compactinternal structure and a stylish exterior. Fits for boats rated to a maximum of 700 HP.
700HP Boat HydraulicSteering Cylinder
The steering kit, including a cable, a pump,a cylinder, and a steering wheel, isideal for skiffs, center consoles, bass boats,and runabouts. The balanced, compactsteering cylinder was developed to fit these smaller splash wells. This affordable system comeswith everything needed for easy installation.
Steering Wheel
Replaceable Shaft Seal
Compact & Neat
Package Content
1 x Hydraulic Pump
1 x Quality Nylon Hose(6M)
1 x Cylinder
1 x Steering Wheel
1 x Accessory Kit
Features:
Direct replacement to your unit.
Plug-and-play, direct fit, easy installation.
No assembly required.
Higher grade of electric components.
Improved heat sink and charging capabilities.
All products shipped are tested.
Specifications:
Material:ABS
Color:Black
OEM Number: 160612 / 16061005
Number of Pieces:1PC
Placement on Vehicle:CDI IGNITION UNIT BOX
Universal Fitment:No
Origin: Mainland China
8 Pin Connector for harnessControl with built in hot horn and tachometer/gauge harness. This is the non power trim model. There is no trim switch on this control box.881170A3 Remote Control 4000 | Electric Start | Side Mount | No Power TrimThis control can be mounted starboard or port side and is stackable. Offers "push to choke" ignition switch, 8 pin connector wiring harness, lanyard stop switch, separate neutral warm‑up lever and requires Gen I throttle and shift cables. 5 pin accessory plug for tachometer and an adjustable throttle friction. Not for use with engines that have counter rotating lower units. Older engines may require an adapter harness.This control features a non‑power trim handle, 15 ft.(4.58 m) harness and built‑in warning horn. Fits all current Mercury/Mariner Outboards 6 HP and above (without power trim) and 1993 and newer Force Outboards 40 HP and higher utilizing Mercury style cables (with power trim).For Model year 2005 and newer 8/9.9 FourStroke Outboards SAE throttle/shift cables must be used. For 8/9.9 FourStroke engines generation change above serial number OR192772 and 15/20 FourStroke engines will use GEN I cables.When used with a model year 2005 and newer 8/9.9, 15/20 FourStroke Outboards, an Adapter harness is required.
